High-Density Optical nTAP Options

The High-Density Optical nTAP (HDOT) can be configured based upon your network needs. Start with just the chassis and a few modules today. Add components as your needs evolve. Below you'll see selections for just the HDOT 1U chassis and selections for the individual modules. You can mix and match modules as you like and create any combination of up to 24 modules in one 1U rack. 

HDOT Chassis

HDOT Chassis

Up to 24 HDOT Modules, 1U Rack Mount

HDOT Modules

HDOT Modules

Highly configurable, choose from an array of module options ranging from Gigabit, 10 Gb, 40 Gb, and 100 Gb speeds in single-mode and multi-mode. Further customize modules through split ratio selection.

  • 1 Gb Multimode HDOT Module (62.5 μm core)
  • 1 Gb Multimode HDOT Module (50 μm core)
  • 1 Gb Single-mode HDOT Module (9 μm core)
  • 10 Gb Multimode HDOT Module (50 μm core)
  • 10 Gb Single-mode HDOT Module (9 μm core)
  • 40 Gb Single-mode HDOT Module (9 μm core)
  • 100 Gb Single-mode HDOT Module (9 μm core)

Analyzer Cables  

62.5 μm LC to LC Multimode Analyzer Cables (3 Meters)

62.5 μm LC to LC Multimode Analyzer Cables (3 Meters)

For use from an Optical nTAP to a dual-receive monitoring device

50 μm LC to LC Multimode Analyzer Cables (3 Meters)

50 μm LC to LC Multimode Analyzer Cables (3 Meters)

For use from an Optical nTAP to a dual-receive monitoring device

9 μm LC to LC Single-Mode Analyzer Cables (3 Meters)

9 μm LC to LC Single-Mode Analyzer Cables (3 Meters)

For use from an Optical nTAP to a dual-receive analysis or monitoring device

Patch Cables

62.5 μm SC to LC Multimode Duplex Patch Cables (3 Meters)

62.5 μm SC to LC Multimode Duplex Patch Cables (3 Meters)

For use with Optical nTAPs

62.5 μm LC to LC Multimode Duplex Patch Cables (3 Meters)

62.5 μm LC to LC Multimode Duplex Patch Cables (3 Meters)

For use with Optical nTAPs

50 μm SC to LC Multimode Duplex Patch Cables (3 Meters)

50 μm SC to LC Multimode Duplex Patch Cables (3 Meters)

For use with Optical nTAPs

50 μm LC to LC Multimode Duplex Patch Cables (3 Meters)

50 μm LC to LC Multimode Duplex Patch Cables (3 Meters)

For use with Optical nTAPs

9 μm SC to LC Single-Mode Duplex Patch Cables (3 Meters)

9 μm SC to LC Single-Mode Duplex Patch Cables (3 Meters)

For use with Optical nTAPs

9 μm LC to LC Single-Mode Duplex Patch Cables (3 Meters)

9 μm LC to LC Single-Mode Duplex Patch Cables (3 Meters)

For use with Optical nTAPs

Single-mode SC to SC Patch Cable (3 Meters)

Single-mode SC to SC Patch Cable (3 Meters)

For use with Optical nTAPs with SC to SC throughput

Multimode SC to SC Patch Cable (3 Meters)

Multimode SC to SC Patch Cable (3 Meters)

For use with Optical nTAPs with SC to SC throughput

50μm MPO to MPO Multimode Patch Cables (2 Meters)

50 μm MPO to MPO Multimode Patch Cables (2 Meters)

For use with 40 Gb Multimode Optical TAPs
(MPO and MTP® connectors are interchangeable)

Secondary Power Supply

Secondary Power Supply

Secondary Power Supply

Redundant power supply for any powered nTAP

Racks and Bays

19 in. 1U Rack Mount Panel

19 in. 1U Rack Mount Panel

Supports up to three copper or optical nTAP units

Additional SFPs (Small Form Factor Pluggable modules)  

SX SFP

SX SFP

Small form-factor pluggable module for 1000Base-SX connections

LX SFP

LX SFP

Small form-factor pluggable module for 1000Base-LX connections