High-Density Optical nTAP

  • Connect up to 24 full-duplex optical links to optical monitoring devices in a single 1U rack
  • Select up to 24 nTAP modules for Gb, 10 Gb, 40 Gb, and 100 Gb monitoring as needed
  • Each module connects to the monitored full-duplex link and an analyzer equipped with a dual-receive capture card

10/100 Copper nTAP

  • Copies Fast Ethernet traffic from a full-duplex copper link for a copper monitoring device
  • Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card

10/100/1000 Copper nTAP

  • Copies gigabit traffic from a full-duplex copper link for a copper monitoring device
  • Auto-negotiates to also support 10 Mb and Fast Ethernet networks
  • Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card

10/100/1000 Copper to Optical Conversion nTAP

  • Copies gigabit traffic from a full-duplex copper link for a copper or optical monitoring device
  • Connects to the full-duplex link under test, and a copper or optical analyzer equipped with a dual-receive capture card

10/100/1000 Aggregator nTAP

Transfers network traffic from a full-duplex copper link to a copper analysis or security device.

  • The 10/100/1000 Aggregator nTAP efficiently copies full-duplex traffic and aggregates the traffic into a single stream to any analysis or security device with a single-receive capture interface
  • Aggregator nTAPs provide greater protection than a SPAN port against packet loss on low-utilization networks
  • Choose from a 256 MB, 512 MB, or 1 GB buffer

10/100/1000 Aggregator Conversion nTAP

Transfers network traffic from a full-duplex copper link to a copper or optical analysis or security device.

  • The 10/100/1000 Aggregator Conversion nTAP not only aggregates full-duplex traffic but also can convert that traffic to be analyzed by a copper or optical single-receive analysis or security device.
  • Aggregator nTAPs provide greater protection than a SPAN port against packet loss on low-utilization networks
  • Choose from a 256 MB, 512 MB, or 1 GB buffer
  • To connect to an optical device, the nTAP will need SFP modules (sold separately).

One-Channel Optical Fiber nTAP

  • Copies traffic from one full-duplex optical link for one optical monitoring device
  • Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card
  • Available in both gigabit and 10 gigabit configurations

Two-Channel Optical Fiber nTAP

  • Copies traffic from two full-duplex optical links for two optical monitoring devices
  • Connects to two full-duplex links under test and two analyzers equipped with a dual-receive capture card
  • Available in both gigabit and 10 gigabit configurations

Three-Channel Optical Fiber nTAP

  • Copies traffic from three full-duplex optical links for three optical monitoring devices
  • Connects to three full-duplex links under test and three analyzers equipped with a dual-receive capture card
  • Available in both gigabit and 10 gigabit configurations

Optical to Copper Conversion nTAP

  • Copies traffic from one full-duplex optical link to one copper monitoring device
  • Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card
  • Compatible with network analyzers, security monitoring devices, forensics tools, remote monitoring appliances, and RMON probes

Optical to Copper Aggregator Conversion nTAP

  • Copies traffic from one full-duplex optical link to one copper monitoring device
  • Connects to the full-duplex link under test and an analyzer equipped with a single-receive capture card
  • Compatible with network analyzers, security monitoring devices, forensics tools, remote monitoring appliances, and RMON probes
  • Choose from a 256 MB, 512 MB, or 1 GB buffer

Optical 40 Gb

  • Copies traffic from one full-duplex optical link to one optical monitoring device
  • Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card